TSF4708 is an amino-functional silicone fluid developed for textile softener use. It can be easily emulsified to stable microemulsions, which give durable softness and smoothness to cotton, blending cotton woven fabrics and knitted products.

KEY PERFORMANCE PROPERTIES:

Good affinity for fabrics.
Easy to formulate.
Imparts durable softness to many fabrics.

APPLICATIONS:

It gives excellent softness and low-yellowing properties to a variety of fabrics.

TYPICAL PRODUCT DATA:

Property	Value
Silicone content, %	100
Viscosity, Pa·s {cP} 25°C(77°F)	1.0 {1000}
Specific gravity 25°C(77°F)	0.98
Appearance	Light yellow, translucent
Refractive index (nD 25)	1.406
Equivalent weight*	2800
Amine equivalent (meq / g)**	0.36

EMULSIFICATION INSTRUCTIONS

15% Silicone Microemulsion (22.5% solid)

Blend the following ingredients using an overhead stirrer.
Slowly add 69.8 parts of ion-exchanged water (part two) with good agitation.
Note: if desired, biocides may be added in this step.
Slowly add 0.2 parts of acetic acid. Agitate well for 5-10 minutes to ensure homogeneity.
Filter the emulsion to remove any dirt or undissolved gel particles. Fine filtration is not required.

AN EVALUATION RESULT:

Treating bath	:2% solid of above emulsion
Test fabrics	:Cotton woven,
Treating condition	:Padding (pick up 100% for Cotton) Drying (130°C 3min)
Evaluation of softness	:Pure Bending Tester (KES-FB2 : KATO TECH Co., LTD) Calculation value* = (B+2HB)/2 B=(Bwarp+Bweft)/2 2HB=(2HBwarp+2HBweft)/2 B : Bending rigidity (gf.cm2 /cm) 2HB : Hysteresis of B (gf.cm2 /cm)
Evaluation of smoothness	:Surface Tester (KES-FB4 : KATO TECH Co., LTD) MID = average of kinetic friction co-efficient MMD*= variation of MIU
Yellowing	:Delta b value measured after 175°C, 30min by color differential tester based on untreated fabric color

Cotton woven	Handling value	e Calculation value *	MID**	MMD***	Delta b
TSF4708	soft	0.043	0.10	0.009	+1.0
TSF4703	slippery	0.043	0.08	0.012	+1.6
Untreated	rough	0.070	0.14	0.015	0

HANDLING AND SAFETY:

Wear eye protection, protective gloves, and a mask when working with this product.
Maintain adequate ventilation in the work area at all times.

STORAGE:

Store in a cool, dry place out of direct sunlight, with the container tightly closed.
Keep out of the reach of the children.

PACKAGING:

1kg can be available in cases of 10 cans

15kg/pail, 200kg/drum

PDMS Fluid 10 CST